The other way around

So i found out how to reverse the direction the robot moves along the edge wire. Exchange the sensor cables from the right and left wire sensing coils, then exchange the motor cables, for the right and left motors.. and install the motor cables with reversed polarity.. done. The robot thinks its doing its normal magic, but its going the other way round :-)

Kommentarer

Send en kommentar

Populære opslag fra denne blog

The support department

So I called the support department to get some support. I wanted it to go the other way around. No luck in doing that, no instructions or otherwise. But. He was interested in some development, and I thought I could use a new hobby. So I got an updated robot, an extra motherboard, a list of different arduino parts, a stack og lithium ion batteries and off we go
Læs mere

Brain change 2. step

ok, so now i needed to connect the Arduino mega, with the old cpu socket. I got the inspiration from  a site i find searching for "grau goes color" He pulled apart a Tianchen TC-G158 robot. This robot is a cousin of the Supoman, using almost the same motherboard layout, so i started using his psuedo drawings, and most importantly i used this drawing as a basis seeing what my motherboard contained. MY board was a bit different.. For one the cpu, while still being a 32pin STC12C5410AD, wasnt in a lqfp-32 , mine was in sop-32 package. Mine also has an IR sensor pointed downwards, this being connected to another multiplexer, thats always pointed at the sensor.. i guess its a buffer or something So i had to trace the functions, and heres my resulting IO list. The sheet also shows how i linked it to the mega. The mega then was powered, from the old stc's programming connector, connection pin 1 & 4 of the programming port, to the micro usb. Then off to ardumover   t...
Læs mere

The beginning

So..I  bought a robot lawnmower, a supoman, called rotenbach In germany. And being me, I didn't think it did a good enough job. It didn't cut the entire lawn, in one go. It went the wrong way around the garden. I couldn't put the charging station Where wanted. And it gets stuck too often. Not nearly good enough so of course, ill hack it.
Læs mere